Product Features:

Product Size: 319 x 270 x 207 mm / 12.6 x 10.6 x 8.15 inches
Product Weight: approx. 10.5 kg (net weight)
AC Output Voltage: 110V / 220V
AC Output Power: 1000W
Wireless Charging: 15W
Battery Capacity: 999Wh (1000W 270000mAh)
Charging Time: more than 90% for adapter 8.5 hours more than 90% for fast charging 2.5 hours
DC Output: USB: 5V/3A Type-C: 65W QC3.0: 18W 12V/10A 13.8 V/5 A

AC Discharge:
- Press and hold the "AC Start Switch" ⑯ for 3 seconds to turn the AC software on or off.
- The AC ON symbol on the power LED screen will illuminate/display the current output voltage. The unit can then be used normally by inserting any load cable into AC output port 1 or port 2, and the current power will be displayed on the screen.
(Note: Please do not use loads that exceed the maximum output power of the unit. The maximum output power of the unit is 1000W. If the load exceeds 1000W, the power supply will enter protection mode and cannot output power. The power supply can be used normally after the excessive load is removed and the unit is restarted.)

To charge the device:
1. Plug the original standard adapter (25.5V/8A) into the "Adapter Charging Port".
2. Plug the output port of the vehicle's cigarette lighter or solar panel (18V / ≥ 150W) into the "Vehicle Charging / Solar Charging Port of the device.
3. Plug the fast charger (25.2V/15A) into the "Fast Charging Port"
4. After randomly plugging in any of the three charging methods mentioned above, the current charging power will be displayed on the device's LCD screen, and the battery symbol (%) will also show the battery charging power individually.


Warning:
1. The power supply must be stored in a dry environment. Proper storage can extend the lifespan of the power supply.
2. If the product is not used for an extended period, please charge and discharge it every 3 months to extend the lifespan of the product cells.
3. Do not store the product in a location where the temperature is too high or too low. Excessively high or low ambient temperatures will shorten the lifespan of electronic products and seriously damage the product casing.
4. Do not wipe the product with corrosive chemical solvents. Visible stains can be wiped with a cotton swab dipped in a little anhydrous alcohol.
5. Handle the product with care during use and do not drop or forcibly disassemble it.
6. This product contains high voltage. Please do not disassemble it yourself to avoid safety hazards.